SW3.5 – CMD_WRITE

This command writes a parameter with the index and subindex as given on the addressed port.

Command:

Octet #Usage
0Command ID = 0x05
1Port ID 0x00 or 0x00
2..3Index, 16-bit value
4Subindex
5Length
6..Write Data

The structure of the Write Data can be found in the SDCI device’s documentation.

Return Success:

Octet #Usage
0Command ID = 0x04
1Port ID 0x01 or 0x02
2..3Index, 16-bit value
4Subindex
5Length (as given in the command)

To verify the write operation, a read operation (Command ID 0x04) can be used on the same Index and Subindex.