The power command switches the L+ power on the corresponding port. After switching on, the communication speed on the SDCI (COM1, COM2, COM3) is automatically detected and cyclic exchange of data is started.
Command:
Octet # | Usage |
---|---|
0 | Command ID = 0x01 |
1 | Port index 0x00 or 0x01 |
3 | Power status 0x00 = OFF 0x01..0xFF=ON |
Return Success:
Octet # | Usage |
---|---|
0 | Command ID = 0x01 |
1 | Port index 0x00 or 0x01 |
3 | Power Status |